Small portable power tool for putting a precise and exact point onto a tungsten. Angle can be varied but consistent repeatable accuracy guaranteed which in turn ensures consistent arc striking and weld quality. In a nutshell the more exact the point the less chance of a mis-firing arc or arc wander.

Neutrix is the only machine that is equipped with an integrated dust filter, thereby protecting the operator and the environment against the unhealthy dust produced during grinding of the electrode. The filter is replaceable.

Due to the use of an electrode holder NEUTRIX is able to grind electrodes as short as 15mm with a standard electrode clamp, with a special electrode clamp as short as 8mm can be ground. The use of the electrode holder also ensure a precise and centered tip.

Neutrix is equipped with an inspection cover enabling the operator to see the grinding operation. Neutrix is easy to operate, set the required grinding angle, secure the electrode into the holder using the locking device. The electrode is now set so as to minimise the amount of grinding required (0.3mm removal).

As something quite unique NEUTRIX is equipped with an eccentric plate, which makes it possible to adjust the grinding position on the face of the wheel, this triples the life of the diamond wheel.

NEUTRIX is supplied in a case fully equipped for use, electrode clamps for 1.6, 2.4 and 3.2 diameter tungstens are included, other sizes are available. NEUTRIX is CE marked and is manufactured to meet all EU directives.